Interlocking Veneer Panels

Interlocking Veneer Panels

[embedyt] https://www.youtube.com/watch?v=udJOwJMU13c[/embedyt]

NEM is revolutionizing the veneer installation process with their new interlocking veneer panels. These panels can be installed in seconds, compared to 10x the time it takes to lay loose individual veneer stone pieces.

Interlocking Veneer Panels BerkshireWhat makes these panels different from tradition veneer panels is their staggered shape which makes it nearly impossible to detect seams. The classic elegance and intricate detail of small stones combined with the simplicity of a panel system allows this paneling system to mimic the appearance of a precision hand-laid dry-stack veneer stone. 

Interlocking Veneer Panels Installed

  • Panels are fast, simple, and economical to apply
  • Easy to use, no specialist skills required.
  • No need to fill grout joints
  • Seamless walls and corners.
  • Suitable for exterior and interior use.

NEM Interlocking Panels come in the ever popular ledge stone cut in the colors New England Blend or Berkshire.

       Interlocking Veneer Panels New England Blend      Interlocking Veneer Panels Berkshire

How to Install  Interlocking Veneer Panels

Step 1: Calculate 

Calculate the square footage of the area. Interlocking Veneer Panels come in corner pieces and flat pieces. Linear footage is used to calculate corner pieces and square footage is used to calculate flat pieces.

Interlocking Veneer Panel Flats      Interlocking Veneer Panels Corners

To figure out the square footage simply multiply length by height. To calculate the liner footage for corners simply measure the height of all walls and add together.

*Tip: Be sure to subtract the areas filled by doors, windows, and fireplace openings.

Step 2: Prepare

Prepare the surface area by making sure that the existing surface is sound and level (i.e. repair cracks). Interior and exterior applications may require different preparations for the stone veneer. If you are unsure about your existing surface area please contact a representative at TLC Supply. 

Step 3: Layout

Making a mock-up pattern on the floor because applying the stone to the wall is usually recommended. Make sure that panels are fitted together at random so a repeating pattern isn’t created. It is helpful to start with the corner pieces and then fill the inside.

Interlocking Veneer Panel Starter Panel
Starter Panel

Once you have laid out the corners start at the bottom with the Starter Panels. These panels are 1/2 height and are used on the first course of an installation. Starter Panels will give you the offset you need for the rest of the area.

*Tip: Instead of cutting a full size panel in half and potentially wasting product, use the Starter Panels to save time and money.

Pieces may need to be cut to lay flush against the floorboard, ceiling, or fireplace opening. You may cut the pieces with a wet saw using a carbide or diamond tip blade. Be sure to wear protective eyewear and follow proper safety measures when cutting stone veneer.

Backside of Interlocking Veneer Panel
Backside of Interlocking Veneer Panel

Step 4: Install

Run a horizontal chalk line every 18 inches for a reference point to help keep your courses level. Dampen the wall to increase the bonding strength of the mortar. Spread approximately ½ inch of polymer modified mortar such as Ardex X5 to the back of the stones (make sure there is 100% coverage) with a 1/4” mason’s trowel or notched towel.

Apply the stone to the wall with firm pressure and wiggle it gently to make sure the mortar is evenly coated. Hold the stone in place for a few seconds to ensure a secure bond. If the mortar seeps out you may use a damp cloth or sponge to wipe it away.

The beauty of having the panels already fixed to a precast backing is that there is no need to fill mortar joints. This eliminates the step of needing more than one type of mortar to fill the joints.

Interlocking Veneer Panels New England Blend Installed
Interlocking Veneer Panels New England Blend Installed

Step 5: Cleaning and Sealing

If mortar gets on the panels you may use a gentle cleaner such as Simple Green to remove it. If the application is outside you may wish to seal it to help prevent water damage and stains. We highly recommend a breathable siloxane/silane blend sealer. Keep in mind that not all sealers are created equal, to learn more about sealers please visit our blog post on sealers. Different types of stone react differently to different types of sealers so it is important to select the proper one. Since these interlocking veneer panels contain granite we recommend using Prosoco Stone, Masonry, and Tile Protector to seal them.  

—————————————————————————————————————-

You can find Interlocking Veneer Panels as well as other types of natural thin veneer stone at TLC Supply in Quincy, MA. Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand,cement, and much more!

The experts at TLC Supply are happy to answer any of your project questions, just give us a shout! 

 “Best Price, Best Advice” -TLC Supply,Inc.

2017 Techo-Bloc Contractor Showcase Massachusetts

Techo Bloc 2017 Contractor Showcase Massachusetts

Don’t forget to sign up for the 2017 Techo-Bloc Contractor Showcase!

2017 Techo-Bloc Contractor Showcase Massachusetts

The seminar will be led by Pete “Paver Pete” Baloglou, director of sales, education and information at Techo-Bloc, and will cover everything from new products, installation methods, and best practices. Plus you will have the chance to network and strategize with colleagues, vendors, and suppliers.

Massachusetts Seminar Dates:

  • Feb 17 Hyannis
  • March 07 Westborough

The complete list of Contractor Showcase dates is viewable online at techo-bloc.com, where it also is free to register.

___________________________________________________________________________

TLC Supply in Quincy, Massachusetts is your #1 Techo-Bloc authorized dealer! We have an extensive Techo Bloc inventory and a large outdoor patio display featuring Techo-Bloc’s premium paving stones and walls. Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand,cement, and much more!

 

The experts at TLC Supply are happy to answer any of your project questions, just give us a shout! Send us an email to info@tlcsupply.com or leave your comments below. 

 “Best Price, Best Advice” -TLC Supply,Inc.

 

Pre-Made Outdoor Fire Pits

Nothing brings people together like a nice campfire…

So why not gather around, roast some marshmallows, and create lasting memories with an easy to assemble Pre-Made Outdoor Fire Pit?

pre-made outdoor fire pit easy to assemble

An outdoor fire pit can transform your backyard  into the family’s favorite gathering spot and become the place where memories are made. Outdoor fire features have become the hottest growing trend in outdoor living since homeowners have begun yearning to make their outdoor spaces as warm and inviting as the interior of their homes. Pre-made Outdoor Fire pits are available in a variety of colors and can add a touch of elegance to any outdoor living space.

pre-made outdoor fire pit easy to assemble
Techo Bloc Valencia Fire Pit

pre-made outdoor fire pits

It’s That Easy! – How to Install Valencia Fire Pit:

Step 1: Create a compact level surface.

Step 2: Begin creating the fire pit by laying pre-cut blocks in a circle.

pre-made outdoor fire pitsStep 3: Place second row of blocks.

Tip: When installing the second layer, overlap the joints by placing the center of the bloc directly on top of the joint made by the two adjoining blocks beneath it.

Step 4: Fill the inside with 3/4″ crushed stone. This will allow the filtration of rain water.

Pre-made outdoor fire pitStep 5: Once you have built up 4 rows of block then install the metal bowl insert and place the last layer of stone. Top it off with a spark screen and enjoy!

 

Get Inspired…

pre-made outdoor fire pits
Techo Bloc Prescott Fire Pit
pre-made outdoor fire pits
Techo Bloc Raffinatio Fire Pit

You have to try this!

Want to spice up your fire pit and impress your guests? Check out how to make these super easy Pine Cone Fire Starter. You can create inviting scents of cinnamon and vanilla or rosemary and lavender. Click here to make your own Pine Cone Fire Starter

pre-made outdoor fire pit pine cone fire starter
Pine Cone Fire Starter Tutorial from Kate’s Creative Space

TLC Supply carries a selection of pre-made outdoor fire pits from premium paver manufacturer’s Techo BlocGenest ConcreteBelgard and Cambridge Pavers. Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand,cement, and much more!

The experts at TLC Supply are happy to answer any of your project questions, just give us  leave your questions or comments below. 

 “Best Price, Best Advice” -TLC Supply,Inc.

 

 

Paver Pool Deck & Patio Ideas

Patio pavers around a pool are a great way to create your very own private oasis right in your backyard! Make your outdoor swimming pool deck a stunning and inviting resort with patio pavers, slabs, pool coping, flagstone, or natural stone.

What better way is there to enjoy the upcoming warm days than relaxing or entertaining by your new pool with friends and family?

Did you know?  Pavers are the perfect performer for pool decks!  Since concrete pavers are designed with textured tops they make for a safe, comfortable, non-slip walking surface even when wet! In addition, the high density structure of pavers will help minimize penetrating moisture and reduce damage caused by freeze conditions.

Now Dive Right In! Take a Look at These 7 Beautiful Hardscape Poolsides! 

Paver Patio Pool Deck Pavers
Bluestone Pillar Caps
Paver Patio Pool Deck Pavers
Techo Bloc Inca
Paver Patio Pool Deck Pavers
Techo Bloc Rotondo
Paver Patio Pool Deck Pavers
Techo Bloc Portofino / Antika
Paver Patio Pool Deck Pavers
Techo Bloc Bullnose Pool Coping
Paver Patio Pool Deck Pavers
Techo Bloc Royale Slab
Paver Patio Pool Deck Pavers
Techo Bloc Athena Paver

4 Helpful Tips for Your Next Paver Pool Project!

TIP #1: To install a patio around your pool you would follow the same steps as installing a basic patio (click here for paver installation guide). The difference is that you will need to use an expansion joint around the perimeter of the pool that sits between the patio pavers and the pool coping.

There are several reasons why it is necessary to use a strip foam expansion. First, it will assist in freeze thaw cycles and even in hot weather because it will allow for flexibility and movement of the pavers. Secondly, it will help prevent any water from seeping down behind the pool shell and weakening the concrete joints.

To use the foam expansion you would simply place the foam around the perimeter of the pool coping. Then install your patio pavers as you normally would. The foam expansion will help keep out any poly sand you use to fill the paver joints. Next remove the 1/2 “ tear strip on the foam expansion and fill the void with a self-leveling pool caulk.

Tip #2: To keep pool caps from popping off you may want to use a fiber reinforced mortar such as Ardex X 32. We recommend Ardex X 32 because it is designed to handle the most challenging moisture sensitive stone, granite, marble, as well as  tiles, both interior and exterior. Ardex X 32 is durable, easy to use, has great bonding capabilities and controlled setting time, and it will not warp or shrink.

Paver Patio Pool Deck Pavers
Techo Bloc Mini Creta Retaining Wall
Paver Patio Pool Deck Pavers
Techo Bloc Mista
Paver Patio Pool Deck Pavers
Techo Bloc Flagstone

Tip #3: You can even dress up the landscape around your pool even more by incorporating decorative plants and flowers.  Add an accent trim to your surrounding garden with patio edging pavers or granite cobblestones. You can build raised planters with pavers or even with retaining walls.

Retaining walls and stone walls surrounding the pool area also serve as privacy walls. Incorporate stone pillars and fences to keep the area gated and safe while adding a touch of elegance.

Adding a cabana or pergola gives you and your family added protection from the sun and serves as an additional area for entertaining guests day or night.

Tip #4: If you want to take it to the next level you can incorporate other outdoor elements.

Feed your hungry guests from a new outdoor pizza oven (pre-cut and ready-to-assemble) and stay outside longer with fireplace and fire pit kits for those chilly nights. Pre-assembled fire pit kits are can be installed quickly and fit into any budget!

Paver Patio Pool Deck Pavers
Belgard Fire Pits
Paver Patio Pool Deck Pavers
Belgard Outdoor Kitchen
Paver Patio Pool Deck Pavers
Outdoor Bar

Let us know which poolside design was your favorite in the comments below!

TLC Supply carries a wide selection of premium pavers from Techo Bloc as well as from Genest ConcreteBelgard and Cambridge Pavers. Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand,cement, and much more!

If you liked this page be sure to share it with all your friends! And for even more inspiring paver pool decks, patios, as well as backyard DIY projects and outdoor entertaining ideas follow us on Pinterest!

WAIT! Before you go check this out! You may even like our posts  on How to Build a Paver Patio! or Ardex Mortar – The Efficient & Easy Way to Install Stone!

The experts at TLC Supply are happy to answer any of your project questions, just give us a shout! Send us an email to info@tlcsupply.com or leave your comments below. 

 

 “Best Price, Best Advice” -TLC Supply,Inc.

How to Build a Paver Patio!

Building a patio out of paving stones or “interlocking concrete pavers” can be a beautiful and valuable addition to your home and can offer a durable, low maintenance area for you and your family to enjoy. You may opt to hire a professional mason but with these 10 steps you can install a paver patio all on your own!

Here are 10 Steps to help you build your very own outdoor paver patio!

Paver Patio, Techo Bloc
Athena Pavers by Techo Bloc

 

Step 1: Plan

Paver Patio, Rotundo PaversDetermine what kind of paver you would like to use for your patio. There are many paving stone manufacturer’s to choose from that offer pavers in many different shapes, colors, sizes, and cost.

Did You Know? TLC Supply carries only the highest quality pavers backed by a lifetime manufacturer’s guarantee.

During this stage you will also want to determine the size, length, and design of your patio. Next, calculate your square footage to determine how much material you will need by multiplying length by width. You may even prefer to make a pattern.Research your selected paver manufacturer to see what patterns you can make with their pavers. Some patterns will require more or less pavers. Call TLC Supply for help in determining the amount of pavers you may need.

Step 2: Prepare the area

Clear any plants, roots, large rocks, or existing material that may interfere with the patio or cause unevenness.

Step 3: Mark the area

String StakesUse chalk line to mark out the area and if you are doing a curved design you can use a garden hose to mark the shape you wish to take and trace with chalk or paint. Then drive stakes into the ground following your laid out sketch. Wrap string around the stakes to outline the perimeter of the patio. Be sure to keep the string level so that your patio will be leveled.

Tip: It is actually the law to call your local utility company or “Dig Safe” and have them identify any buried gas, water, or electrical lines before you start digging.

Step 4: Excavate

Measure the thickness of your paver then dig a depth of 6”-8” below the bottom of the paver. This excavation should also allow room so that the pavers end up being flush with the ground. To avoid puddling you will want to slightly slope the patio in one direction so water can run off.

Tip: You can lay boards across the area and use a level to help you determine the slope.

Step 5: Back Fill

Fill the sunken area with 4”-6” of base material such as ¾” dense grade. This will help provide a solid base and aid in proper water percolation into the soil.

Paver CompacterTip: Fill the area with dense grade in 2” increments and compact with a machine plate compacter. This will ensure that the material is tightly packed. Pour another 2” of dense grade and repeat the steps until everything is compacted evenly to a depth of about 6”.You can even spray the area with water to help keep the dust down when tampering.

Step 6: Sand

ScreedApply a 1”-2” layer of concrete sand over the dense grade and compact it.

Tip: We recommend concrete sand rather than mason sand because it will provide more stability and assist in water percolation.

Now lay down two pieces of round level piping and push it a little into the sand. Depending on the width of your patio you may need to use a longer or shorter pipe. Doing this is going to help ensure your base is level before applying the pavers. Now spread more sand to make sure it is flush with the pipe. You can use a 2 x 4 to screed the sand to a smooth surface. If you cut a 1 3⁄4-in.-deep notch at each end of the 2 x 4, you can rest the notches on the edge restraints while you pull the 2 x 4 across the sand. Once the area is leveled, gently remove the pipe and fill the void with sand and smooth the area out.

Step 7: Lay the Pavers

Start laying the pavers in your desired pattern. Keep the pavers close together and gently press them down with a rubber mallet. If a paver is uneven you can tap it down more into place. If a paver is too low you can add a little sand to the area and rest the paver on top. To better fit pieces you may need to use a wet saw or a paver guillotine to cut pieces to the desired measurement.

Step 8: Edging

Beast Paver EdgingAdd plastic edging to the sides to define the perimeter of the walkway and to hold the pavers in place. Hold the edging in place with spikes. We recommend B.E.A.S.T. Plastic Paver Edging for its strength and flexibility. B.E.A.S.T. edging comes in 8 ft. sections and can be nailed in with 10” or 12” spikes. This edging is also made from recycled material and it allows for the growth of vegetation.

 

How to build a paver patio
So far you should have something that looks like this!

 

Step 9: Fill Paver Joints

Polymetric SandWhen you finish laying the pavers pour polymeric sand over the top and gently sweep the sand over the whole area to fill the joints. Tamper the top to ensure compaction. You may need to add more sand and fill the joints again. When the joints are compacted and filled you should sweep away any excess sand with a broom. We highly suggest lightly blowing over the area with a leaf blower to ensure that the sand is off the surface of the pavers (polymeric sand will harden when wet).  Then you will want to mist the patio with water to secure the sand and pavers.

Tip: We recommend using polymeric sand over mason sand because it contains binders that help maintain a firm bond between the pavers which in turn help to secure them in place.

Step 10: Touch Up

Paver PatioFill in any missing areas with topsoil or grass. The roots of the grass will grow through the holes in the edge restraint to further lock it in place. You also can also add cobble stones or paver edging and even plant flowers or shrubs for a finishing touch to your patio.

Tip: Decorate your patio with furniture or even add a pergola, an easy to assemble fire pit, or you can even veneer the front of a grill to create an outdoor kitchen! The possibilities are endless in your new outdoor living space. Fill it with things that make you and your family happy.

Recommended: We highly recommend sealing your pavers with a breathable sealer to help prevent any staining.

*You can always follow this guide to install a paver walkway as well.

Paver Patio, Techo Bloc Linea
Linea by Techo Bloc

 

Patio Paver Techo Bloc Aberdeen
Aberdeen by Techo Bloc

 

Paver Patio Techo Bloc Athena
Athena by Techo Bloc

TLC Supply carries a wide selection of premium pavers from Techo Bloc as well as from BelgardCambridge Paving Stone, and Genest (coming soon!). Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand, and cement!

If you liked this page be sure to share it with all your friends! And for even more inspiring paver patios as well as backyard DIY projects and outdoor entertaining ideas follow us on Pinterest!

WAIT! Before you go check this out! You may even like our post 10 Unique Hardscape Ideas!

We are happy to answer any of your project questions, just give us a shout! Send us an email to info@tlcsupply.com or leave your comments below. 

 

 “Best Price, Best Advice” -TLC Supply,Inc.

Bricks (Types, Styles, Colors, and Textures)

A Quick Overview of Brick Styles, Colors, and Textures!

With so many manufactures and innovative computer technology, consumers now have an even greater selection of classic brick styles, colors, and textures. Brick can deliver classic beauty, strength, and durability to any home or building.

We will give you a very brief overview of some popular brick manufacturing processes, finishes, and colors!

Manufacturing Process:

Clay Brick can be molded in several ways but we are just going to touch upon some common processes.

1. Water struck brick is a type of mold that is popular in New England. During the brick making process, soft clay in pressed into a mold and water is used as the release medium to keep the clay from sticking to the mold. Water struck brick produces a smooth, hard, sand free texture.

2. Sand molded brick is similar to the water struck process but instead of water sand is used in the lining to keep the clay from sticking to the mold. The result is a smooth sandy texture.

Handmade Brick
Redland Brick Cushwa Handmade

3. Hand molded brick just as the name implies is clay that is individually molded by hand. Unique features rise out of hand molded brick such as folds and crevices which give it distinguished classic appearance.

4. Extruded brick or machine molded is a more modern method of producing brick. Through this process you can achieve a wire cut, rolled edged, glazed, or smooth finished brick. Extruded brick can be more regular in size compared to hand molded brick. Through this process low moisture clay is extruded under pressure through a die to produce a distinctive brick shape.

Types of Finishes:

1. Wire cut brick or matt refers to bricks that are sliced by the wire. The wire pulls the edge of the brick, stressing the clay and creating small cracks in the surface of the stretched material. When fired in a kiln, the stretch marks on the surface of the baked brick separate into rough cracks and crevasses. This feature is what gives the bricks the visual appeal that many builders and homeowners seek in a finished appearance.

2. Antique bricks are machine molded brick with a handmade appearance. Antique bricks are wonderful for achieving that reclaimed look due to production methods to give them that, aged, tumbled and worn appearance.

3. Glazed brick has a glaze applied to it prior to firing and results in hardened surface with textures that vary from glass-smooth, speckled, and rough.

Brick Vertical Score
Endicott Vertical Score

4. Vertical Score brick have a face surface with vertical cuts to give it a very distinct texture and look.

Brick Colors:

Clay Brick can come in an array  of colors such as white, tan, rose, pink, red, orange, gray, cream, burgundy, buff, brown, and black!

Full Range is the term referred to brick that display a full range of color rather than being one color as a whole. For example, you may have a cube of brick with varying tones of red and black.

Brick Flashing
Redland Brick KF Pavers with Flashing

Sometimes you may even see brick with various dark spots on the face or surrounding the edge. This is referred to as “flashing”. Iron spots found on brick refer to little black dots speckled on the surface.

In addition to the various brick colors you can even choose to change the color of the mortar joint. Changing the mortar color can alter the appearance of your bricks so it is important to plan your brick and mortar colors together. Mortar color can bring about a light warmer feel or even a dramatic contrasting effect.

Brick Mortar Color

TLC Supply, Inc. has all the materials you need to get your project done! We carry a wide selection of premium modular, paver, and thin brick from brands such as Rocky Ridge, Harmar, Cushwa, Pine Hall, McAvoy, KF, Endicott, and Stiles & Hart.  We have hundreds of brick sample boards displaying the many different brick colors, textures, and molds.

So whether you are looking to build something new or add to an existing brick surface you are sure to find something to meet your needs! In addition we provide custom fabrication if you wish to have your brick engraved.

If you liked this page be sure to share it with all your friends! And for even more inspiring brick walkways and patios as well as backyard DIY projects and outdoor entertaining ideas follow us on Pinterest!

WAIT! Check this out! You may even be interested in our post How to Build a Brick Walkway & Patio. 

The helpful staff at TLC Supply are happy to answer any of your project questions, just give us a shout! Send us an email to info@tlcsupply.com or leave your comments below. 

10 Unique Hardscape Ideas

10 Hardscape Ideas You Can Do to Enhance Your Backyard Living!

Incorporating hardscape into your landscape design is a great way to add major curb appeal and value to your home.

There are many ways you can create an enticing and beautiful backyard and/or frontyard that your whole family will enjoy for years to come. Check out these ideas below!

Idea #1: Use various colors and textures to create eye catching paver patterns and mosaics.

Chevron Hardscape Pattern
Techo Bloc Borealis Chevron Pattern
Pavers Techo Bloc
Techo Bloc Travertina
Hardscape Pavers
Techo Bloc Antika / Blu Grande

Idea #2: Include custom design work by engraving your stone.

Custom Stone Fabrication
TLC Custom Fabrication

 Idea #3: Bring the waterpark to your backyard with permeable pavers by building a fountain play area for kids or pets.

Permeable Pavers
Belgard Permeable Paver Eco Dublin

Idea #4: Entertain your guests with outdoor kitchens, pizza ovens, fireplace kits, and recessed seating areas.

Outdoor Fireplace
Techo Bloc Mini Creta
Outdoor Kitchen Hardscape
Belgard Harmony Element Kitchen
Hardscape Outdoor Fire Pit
Techo Bloc Valencia Firepit

 Idea #5: Add decorative paver edging and cobble stones to a garden or create raised planters to keep pet’s out of your beautiful flowers.

Paver Edging
Techo Bloc Avignon
Hardscape Retaining Wall Stone
Belgard Retaining Wall Stone

Idea #6: Dress up a garden with natural stepping stone, garden stones, or slate pavers.

Natrual Stone Step

Natural Stone Step
Techo Bloc Maya Step

 Idea #7: Create the illusion of separate spaces by using different pavers in various areas and separating spaces with retaining wall systems or pillars.

Hardscape Ideas
Belgard Weston wall

Outdoor Hardscape Grill

 Idea #8: Light up the night with paver and outdoor lighting.

Hardscape Patio Ideas
Techo Bloc Raffinato
Cambridge Pavers
Cambridge Pavers LED Lights

Idea #9: Bring the resort spa into your backyard with natural stone and stone veneer.

Natural Stone Veneer
Natural Stone / Veneer
Natural Stone Veneer
Realstone Systems Shadowstone

Idea #10: Relax with the soothing sound of an outdoor water feature or pond.

Natural Stone

waterfeature
Techo Bloc Mini Creta

Start planning your springtime hardscape project with TLC Supply. We are open year round so come on down with your plans, pictures, and ideas. Beat the rush by planning early and let us dedicate our time to you so that you can create the wonderful outdoor living space you’ve been dreaming of all winter.

TLC Supply carries a wide selection of premium pavers from Techo Bloc as well as from BelgardCambridge Paving Stone, and Genest. Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand, and cement!

If you liked this page be sure to share it with all your friends! And for even more inspiring paver patios as well as backyard DIY projects and outdoor entertaining ideas follow us on Pinterest!

WAIT! Before you go check this out! You may even like our post How to Build a Paver Patio!

We are happy to answer any of your project questions, just give us a shout! Send us an email to info@tlcsupply.com or leave your comments below. 

 

 “Best Price, Best Advice” -TLC Supply,Inc.

 

Protect Pavers During Winter

Protect Pavers and Other Hardscape & Masonry this Winter!

Snow Comic

Protect pavers with these 4 simple tips! Keep these in mind this winter to help prevent any damage winter may bring  to your pavers, brick, or any other hardscape products . I’ve also included 3 Tips on how to protect your roof and prevent any water damage from ice dams. So let’s get started!

4 Tips to Protect Your Precious Patios, Driveways, and Walkways: 

Safe Ice Melt for PaversTip 1: Use an ice melt that does little damage to infrastructure and environment. We recommend ice melts with a blend of Magnesium Chloride which is a safer alternative to rock salt. Calcium Magnesium Acetate is another smart alternative because it is biodegradable and safe for pets, masonry, and the environment. Mr. Magic® is a great premium ice melt brand that is fast acting and long lasting! It works at temperatures down to -25° Fahrenheit.

Mr. Magic is safe for masonry, decks, roofing, pets, and the environment! Always make sure the ice melt label says it is safe for hardscape and masonry products. If you cannot find any ice melt that is safe for hardscape then you can sprinkle sand or cat litter for traction. If you opt to use regular (non-safe) ice melt then just be aware of the risk and use it sparingly. But I do have to say this – Please do not risk your safety or the safety of others to protect your hardscape! If an area is heavily coated with ice then go ahead and use the necessary amount of ice melt (whatever it may be) to prevent slips and falls.

Rubber Snow PlowTip 2: Metal blades on shovels and plows can scratch the surface of your driveway, walkway, or patio. If you hire a plowing contractor be sure they use a rubber or polyurethane blade on the plow. Be sure to use a nonmetal shovel as well.

Paver freeze thawTip 3: If you are using a snow blower please be careful of pavers that may have moved or lifted during freeze and thaw cycles. Avoid any “lippage” which can occur when a paver, brick, concrete, or even cobble stone edge sticks up from another. This “lip” can catch on snow blowers, plows, and shovels.

Tip 4: On a warmer day you may want to sweep off any excess snow or products on your pavers. This step is not necessary but it never hurts! This can help remove any harmful deicer products and prevent future damage.

 

3 Great Tips for Removing Snow from Your Roof: 

We have been getting some great questions from customers asking how to remove snow from their roofs. Here are a few simple steps you can take to eliminate snow and ice dams which can otherwise wreak havoc on your roof. As always please proceed with caution when removing snow from your roof, be aware of any icicles that may be hanging, have someone assist you with a ladder, and wear protective clothing and eyewear.

Roof RakeTip 1: Purchase a roof rake to help alleviate some of the stress the snow may be putting on your roof. A roof rake is a solid piece of metal or plastic about 16 to 20 inches wide on the end of an extension pole, which allows you to rake or pull snow off the roof. Please refer to manual for proper handling and safety instructions.

Ice DamsTip 2: Diminish ice dams with panty hose or long socks! It is that easy! All you need to do is fill the leg of a panty hose with ice melt and lay the hose onto the roof so that it crosses the ice dam and slightly hangs over the gutter. Use a long handle stick to position the hose or sock if necessary.

Ice pucksTip 3: Do-It-Yourself Roof Melt Tablets. Roof Melt Tablets are little pucks that you can easily toss onto your roof to help prevent damage from ice dams. The way these tablets work is the salt and water mixture melts and drains down, melting the ice in its path. If this is not done then there is the potential of snow and ice buildup underneath shingles which can then seep into interior walls and attics. A simple way to make your own roof tablets is by following the same steps in Tip 2. This is where your old mismatched socks come in handy! All you need to do if fill up socks with ice melt, tie them, and carefully toss them all over your roof.  Ice melt socks are porous and flexible and they are just as effective at removing ice dams.

TLC Supply carries a wide selection of premium pavers from Techo Bloc as well as from Genest ConcreteBelgard and Cambridge Pavers. Please visit our website to see even more hardscape and masonry products ranging from bluestone,granite,brick,natural stone,block,sand,cement, and much more!

If you liked this page be sure to share it with all your friends! And for even more inspiring paver pool decks, patios, as well as backyard DIY projects and outdoor entertaining ideas follow us on Pinterest!

WAIT! Before you go check this out! You may even like our posts  on How to Build a Paver Patio

The experts at TLC Supply are happy to answer any of your project questions, just give us a shout! Send us an email to info@tlcsupply.com or leave your comments below. 

 

 “Best Price, Best Advice” -TLC Supply,Inc.